Network Settings (With Vlan) - peplink Balance One User Manual

WAN for Drop-
Select the WAN port to be used for drop-in mode. If WAN 1 with LAN Bypass is selected,
In Mode the high availability feature will be disabled automatically.
When this option is enabled, the passthrough IP address will be used to connect to WAN
hosts (email notification, remote syslog, etc.). The Balance will listen for this IP address
when WAN hosts access services provided by the Balance (web admin access from the
Shared Drop-In
WAN, DNS server requests, etc.).
IP A
To connect to hosts on the LAN (email notification, remote syslog, etc.), the default gateway
address will be used. The Balance will listen for this IP address when LAN hosts access
services provided by the Balance (web admin access from the WAN, DNS proxy, etc.).
Access to this IP address will be passed through to the LAN port if this device is not serving
the service being accessed. The shared IP address will be used in connecting to hosts on
Shared IP
the WAN (e.g., email notification, remote syslog, etc.) The device will also listen on the IP
Address A
address when hosts on the WAN access services served on this device (e.g., web admin
accesses from WAN, DNS server, etc.)
Enter the WAN router's IP address in this field. If there are more hosts in addition to the
WAN Default
router on the WAN segment, click the
Gateway
the I have other host(s) on WAN segment box and enter the IP address of the hosts that
need to access LAN devices or be accessed by others.
WAN DNS
Enter the selected WAN's corresponding DNS server IP addresses.
Servers
A - Advanced feature, please click the

12.2.2 Network Settings (With VLAN)

By default, LAN is configured without VLAN functionality enabled. To Enable VLAN, click the ,
icon on the right of the IP Settings menu. After clicking through a confirmation dialogue, the
following menu will appear:
Click the VLAN you wish to edit or click New LAN to create a new VLAN. When you do so, the
following configuration menus will appear:
http://www.peplink.com
button next to "WAN Default Gateway" and check
button on the top right-hand corner to activate.
64 Copyright @ 2017 Peplink