Outbound Policy - peplink Balance One User Manual

12.4 Outbound Policy

Outbound policies for managing and load balancing outbound traffic are located at
Network>Outbound Policy. Click the
A selection menu will appear, giving you the choice between three different Outbound Policy
Settings:
High
Outbound traffic from a source LAN device is routed through the same WAN connection
Application
regardless of the destination Internet IP address and protocol. This option provides the
highest application compatibility.
Compatibility
Normal Outbound traffic from a source LAN device to the same destination Internet IP address will
be routed through the same WAN connection persistently, regardless of protocol. This
Application
option provides high compatibility to most applications, and users still benefit from WAN link
Compatibility
load balancing when multiple Internet servers are accessed.
Outbound traffic behavior can be managed by defining rules in a custom rule table. A
Custom
default rule can be defined for connections that cannot be matched with any of the rules.
The menu underneath enables you to define Outbound policy rules:
The bottom-most rule is Default. Edit this rule to change the device's default manner of
controlling outbound traffic for all connections that do not match any of the rules above it. Under
http://www.peplink.com
button beside the Outbound Policy box:
Outbound Policy Settings
81 Copyright @ 2017 Peplink