Wireless Ssid - peplink Balance One User Manual

The AP controller for managing Pepwave APs can be enabled by checking this box. When
this option is enabled, the AP controller will wait for management connections originating
AP
from APs over the LAN on TCP and UDP port 11753. It will also wait for captive portal
connections on TCP port 443. An extended DHCP option, CAPWAP Access Controller
Management
addresses (field 138), will be added to the DHCP server. A local DNS record, AP
Controller, will be added to the local DNS proxy.
The AP controller supports remote management of Pepwave APs. When this option is
enabled, the AP controller will wait for management connections originating from remote
APs over the WAN on TCP and UDP port 11753. It will also wait for captive portal
connections on TCP port 443.
The DHCP server and/or local DNS server of the remote AP's network should be
configured in the DNS Proxy Settings menu under Network>LAN. The procedure is as
follows:
Support
Remote AP
Access points to manage can be specified here. If Any is selected, the AP controller will
Permitted AP
manage any AP that reports to it. If Approved List is selected, only APs with serial
numbers listed in the provided text box will be managed.
13.1.2
Wireless network settings, including the name of the network (SSID) and security policy, can be
http://www.peplink.com
AP Controller
Define an extended DHCP option, CAPWAP Access Controller addresses (field
1.
138), in the DHCP server, where the values are the AP controller's public IP
addresses; and/or
Create a local DNS record for the AP controller with a value corresponding to the
2.
AP controller's public IP address.

Wireless SSID

140 Copyright @ 2017 Peplink