4
Peplink Balance Series products enable all LAN users to share broadband Internet
connections and provide advanced features to enhance Internet access. The following
is a list of supported features:
Supported Network Features
4.1
4.1.1 WAN
●
Multiple public IP support (DHCP, PPPoE, static IP address)
●
Static IP support for PPPoE
●
10/100/1000Mbps Ethernet connection in full/half duplex
●
Built-in HSPA and EVDO cellular modems
●
USB mobile connection (only one USB modem can be connected at a time)
●
Drop-in mode on selectable WAN port with MAC address passthrough network address
translation (NAT) / port address translation (PAT)
●
Inbound and outbound NAT mapping
●
Multiple static IP addresses per WAN connection
●
MAC address clone
●
Customizable MTU and MSS values
●
WAN connection health check
●
Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-
ip.org,tzo.com, and DNS-O-Matic)
●
Ping, DNS lookup, and HTTP-based health check
4.1.2 LAN
●
DHCP server on LAN
●
Extended DHCP option support
●
Static routing rules
●
Local DNS proxy server
●
VLAN on LAN support
4.1.3 VPN
●
Secure SpeedFusion
●
SpeedFusion performance analyzer
●
X.509 certificate support (feature activation required on some Balance models)
●
Bandwidth bonding and failover among selected WAN connections
●
Ability to route traffic to a remote VPN peer
●
Optional pre-shared key setting
●
Layer 2 bridging
●
Layer 2 Peer Isolation
TM
●
SpeedFusion
●
Built-in L2TP / PPTP VPN server
●
Authenticate L2TP / PPTP clients using RADIUS and LDAP servers
●
Multi-Site PepVPN Profile
http://www.peplink.com
Product Features
TM
throughput, ping, and traceroute tests
12
Copyright @ 2017 Peplink