Health Check Settings - peplink Balance One User Manual

Hostname
(Optional)
provide you with a hostname, you can safely bypass this option.
connection.
DNS Servers

Health Check Settings

To ensure traffic is routed to healthy WAN connections only, the Peplink Balance can
periodically check the health of each WAN connection.
Health Check settings for each WAN connection can be independently configured via
Network>Interfaces>WAN>*Connection name*>Health Check Settings.
Enable Health Check by selecting PING, DNS Lookup, or HTTP from the Health Check Method
drop-down menu.
This setting specifies the health check method for the WAN connection. This value can be
configured as Disabled, PING, DNS Lookup, or HTTP. The default method is DNS
Method
Lookup. For mobile Internet connections, the value of Method can be configured as
Disabled or SmartCheck.
http://www.peplink.com
DHCP Settings
If your service provider's DHCP server requires you to supply a hostname value upon
acquiring an IP address, you may enter the value here. If your service provider does not
Each ISP may provide a set of DNS servers for DNS lookups. This setting specifies the
DNS (Domain Name System) servers to be used when a DNS lookup is routed through
this
Selecting Obtain DNS server address automatically results in the DNS servers
assigned by the WAN DHCP server being used for outbound DNS lookups over the
connection. (The DNS servers are obtained along with the WAN IP address assigned by
the DHCP server.) When Use the following DNS server address(es) is selected, you
may enter custom DNS server addresses for this WAN connection into the DNS server
1 and DNS server 2 fields.
Health Check Settings
Health Check Disabled
55 Copyright @ 2017 Peplink