Firmware - peplink Balance One User Manual

Connection
choose from LAN, WAN, and VPN connections.
Restricted
Check this box to restrict management to administrators connected to the management
port.
Admin Access
The CLI (command line interface) can be accessed via SSH. It can also be accessed from
CLI SSH &
the serial console port on some Peplink Balance models. This field enables CLI support. For
Console
additional information regarding CLI, please refer to Section 22.5.
CLI SSH Port
This field determines the port on which clients can access CLI SSH.
CLI SSH
This menu allows you to choose between granting access to LAN and WAN clients, or to
LAN clients only.
Access
This option is for specifying the protocol(s) through which the web admin interface can be
accessed:
Security
Web Admin
This field is for specifying the port number on which the web admin interface can be
accessed.
Port
This option is for specifying the network interfaces through which the web admin interface
can be accessed:
Web Admin
Access
If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.
Allowed LAN
This field allows you to permit only specific networks or VLANs to access the Web UI.
Networks
14.1.2
The firmware of Peplink Balance is upgradeable through the web admin interface.
Firmware upgrade functionality is located at System>Firmware.
http://www.peplink.com
● HTTP
● HTTPS
● HTTP/HTTPS
● LAN only
● LAN/WAN
LAN Connection Access Settings

Firmware

161 Copyright @ 2017 Peplink