Lan; Network Settings (Without Vlan) - peplink Balance One User Manual
For more information, please visit peplink.com
Hide thumbs
Also See for Balance One:
- User manual (261 pages) ,
- Manual (2 pages) ,
- User manual (228 pages)
Table of Contents
Advertisement
has not been not updated for a long time. Therefore, the Peplink Balance performs an update every 23 days, even if
a WAN's IP address did not change.
12.2 LAN
12.2.1 Network Settings (Without VLAN)
By default, LAN is configured without VLAN functionality enabled. To Enable VLAN, click the ,
icon on the right of the IP Settings menu.
Begin setting up your physical LAN by entering IP settings (VLAN configuration will be covered
following physical LAN setup).
Enter the Peplink Balance's IP address and subnet mask values to be used on the LAN. To
IP Address &
Subnet Mask
enable multiple VLANs, press the
Drop-In Mode
Drop-in mode (or transparent bridging mode) eases the installation of the Peplink Balance on a
live network between the firewall and router, such that changes to the settings of existing
equipment are not required.
The following diagram illustrates drop-in mode setup:
http://www.peplink.com
IP Settings
button on the top right-hand corner.
62
Copyright @ 2017 Peplink
Advertisement
Table of Contents
