Dns Forwarding; Custom Service Forwarding; Service Passthrough - peplink Balance One User Manual

specified web proxy server and port number. Redirected server settings for each WAN can be
set here. If forwarding is disabled for a WAN, then web proxy connections for that WAN will
simply be forwarded to the connection's original destination.

DNS Forwarding

When DNS forwarding is enabled, all clients' outgoing DNS requests will also be intercepted
and forwarded to the built-in DNS proxy server.

Custom Service Forwarding

After clicking the enable checkbox, enter your TCP port for traffic heading to the router, and
then specify the IP Address and Port of the server you wish to forward to the service to.
12.15.4

Service Passthrough

Service passthrough settings can be found at Network>Misc. Settings>Service Passthrough.
Some Internet services need to be specially handled in a multi-WAN environment. The Peplink
Balance can handle these services such that Internet applications do not notice it is behind a
multi-WAN router. Settings for service passthrough support are available here.
Service Passthrough Support
http://www.peplink.com 138 Copyright @ 2017 Peplink