Bandwidth Control; Application - peplink Balance One User Manual

12.11.2
This section is to define how much minimum bandwidth will be reserved to each user group
when a WAN connection is in full load. When this feature is enabled, a slider with two
indicators will be shown. You can move the indicators to adjust each group's weighting. The
lower part of the table shows the corresponding reserved download and uploads bandwidth
value of each connection.
By default, 50% of bandwidth has been reserved for Manager, 30% for Staff, and 20% for Guest.
You can define a maximum download speed (over all WAN connections) and upload speed (for
each WAN connection) that each individual Staff and Guest member can consume. No limit can
be imposed on individual Managers. By default, download and upload bandwidth limits are set
to unlimited (set as 0).
12.11.3
You can choose whether to apply the same prioritization settings to all user groups or customize
the settings for each group.
Three priority levels can be set for application prioritization:
Peplink Balance can detect various application traffic types by inspecting the packet content.
Select an application by choosing a supported application, or by defining a custom application
manually. The priority preference of supported applications is placed at the top of the
table. Custom applications are at the bottom.
http://www.peplink.com

Bandwidth Control

Application

118
Normal, and↓Low. The
↑High,━
Copyright @ 2017 Peplink