Interface Specifications; Interface Types - SATO TH2 Series Operator's Manual

INTERFACE SPECIFICATIONS

This section presents the interface types and their specifications for the TH2 Series printers. These
specifications include detailed information to assist in the selection of the most appropriate method for the
printer to interface with the host.
The following information is presented in this section:
•

7.1 Interface types

• 7.2 Universal Serial Bus (USB) Interface
• 7.3 Local Area Network (LAN) Ethernet and Wireless LAN
7.1 INTERFACE TYPES
The TH2 Series has three types of Main PCBs. Each type of PCB is equipped with different interface types in
order to perform data communication with the host. These are described as follows.
1) Type 1: USB on-board
2) Type 2: USB and LAN on-board
3) Type 3: Wireless LAN on-board
.
Model
TH2 series (Type 1)
TH2 series (Type 2)
TH2 series (Type 3)
Caution
Disconnect power before connecting or disconnecting interface cables. Never connect or disconnect
interface cables (or use a switch box) with power applied to either the host or printer. This may caused
damage to the interface circuitry in the printer/ host and is not covered by warranty.
TH2 Series Operator Manual
Interface Types
USB LAN
Yes
Yes
-
Section 7: Interface Specifications
Wireless LAN
-
Yes
-
-
-
Yes
Page 7-1