Specifications; Printer - SATO Argox O4-250 User Manual

7 Specifications

7 Specifications
This chapter provides specifications for the printer.
change without notice.

6.1 Printer

Model
Print method
Resolution
Media Alignment
Operation Mode
Sensor
Operation interface
Print Speed
Printable Area
Print Ratio
Interface
Programming
Language
Accessories
On-Board Memory
O4-250
Direct Thermal and Thermal Transfer
203 dpi (8 dots/mm)
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Peeler mode
Media Transmissive Sensor ( Fixed)
Reflective Sensor (Movable)
LED indicator x 2, Button x 1
2, 3, 4, 5, 6, 7 inches/sec
(50.8, 76.2, 101.6, 127, 152.4,
177.8 mm/sec)
2 &3ips for peel off mode
Max. length 100"
Average print ratio within 15 % or less (whole print layout
Full width with 1mm pitch is required
RS-232 ,Dual USB hosts(Type A), USB device(Type B), Ethernet
Optional: Wi-Fi(IEEE 802.11b/g/n), Bluetooth V4.2, RTC,
Peeler, Full Cutter, Partial Cutter, External Media Stand
Standard Memory (Flash ROM): 16 MB
63
Specifications are subject to
300 dpi (12 dots/mm)
Centered
Head Open Switch
Ribbon end Sensor
Option: LCD display
2, 3, 4, 5, 6 inches/sec
(50.8, 76.2, 101.6, 127,
152.4 mm/sec)
2 &3ips for peel off mode
Max. length 50"
area)
Buzzer
PPLA+PPLB+PPLZ
User Memory: 8 MB
O4-350