Aastra DBC 225 Directions For Use Manual page 57

5.11.2.4
5.11.2.5
5.12
5.12.1
4/1553-ANF 901 54 Uen D4 2014-01-14
If the timer is running, it continues to run but the elapsed timer informa-
tion is not shown in the first row. The display shows instead time and
date in the first row.
The last row indicates a new set of soft-keys available when the timer is
still active but the elapsed time is not shown:
F3 ShowTimer
F4 Exit
To display the time measurement
• Press the soft-key ShowTimer (F3).
The first row will show the elapsed time information. The last row indi-
cates a new set of soft-keys available when the timer is active and
displayed:
F3 ShowDate
F4 Exit
To exit the time measurement
• Press the soft-key Exit (F4).
The timer function is deactivated and the display is used to show the
corresponding traffic information.
Transfer
You can transfer a call to another extension (in your exchange or private
network), subscriber or the PBX operator. If you have more than one
parked call, it will be the last parked call that will be transferred.
Transfer after answer
• Make an inquiry call (press the soft-key Conf/Transf or the
Inquiry-key and wait for dial tone).
• Dial the extension or external number and wait for answer.
• Announce the call.
• Press the soft-key Transfer .
Display the time measurement.
Exit the time measurement.
Show date.
Exit the time measurement.
D
URING CALLS
57