Aastra DBC 225 Directions For Use Manual page 56

DBC 225 MX-ONE
FOR
5.11.2.1
5.11.2.2
5.11.2.3
56
Timer start
The timer automatically starts on entering into speech state without any
user interaction. The timer is not affected by switching between calls,
inquiries and so on.
The following is the procedure to show the timer function:
• Press the soft-key Timer .
The first row in the display is ready to show the elapsed time (00.00). The
last row indicates the timer functions (soft-keys) available when the timer
is activated and running:
F3 ShowDate
F4 Exit
Example of displayed information if the timer function is activated while
the telephone is idle. The picture shows the display information for DBC
225. The clock time is 10:36 and 00:00 indicates the timer counter.
If the soft-key Timer is pressed while the timer is already active and
running (but not displayed) the elapsed time information and the corre-
sponding soft-keys are displayed.
Timer stop
The timer automatically stops at the end of the last call.
Note: The first row in the display shows the elapsed time (stopped). The
last row indicates the soft-keys available when the timer is active
but not running.
F3 ShowDate
F4 Exit
To change from time measurement to date
• Press the soft-key ShowDate (F3).
Show date.
Exit the time measurement.
Show date.
Exit the time measurement.
4/1553-ANF 901 54 Uen D4 2014-01-14