Aastra DBC 225 Directions For Use Manual page 113

4/1553-ANF 901 54 Uen D4 2014-01-14
In addition to this the following signs are used:
# Decreases or increases the pitch tone steps. Press
once to sharp ( # ) twice to flat ( b ) and a third time to
get back to normal. # must be pressed after the tone.
* Press to insert a short pause. Shown with a p in the
display. Press and hold to insert at long pause.
Shown with a P in the display.
Soft-keys Placing the cursor within the melody. Press and hold
</> or Vol. to get to the beginning or to the end of the melody.
-/+
0 The inserted note is raised one octave. A higher
octave is shown with a plus sign (+) before the note.
C Erases the tone to the left of the cursor. If Clear (C) is
pressed and held down, the whole melody will be
erased.
Explanation of terms
Pitch steps:
When a tone is raised or lowered to the next halftone.
Pause:
A number of pauses can be stored continuously. A maximum of 38.
S
ETTINGS
113