Aastra DBC 225 Directions For Use Manual page 36

DBC 225 MX-ONE
FOR
4.4.2
4.4.2.1
36
– Authorization code dialing. This enables the calling party to
use other categories or service profiles than those the exten-
sion is programmed with.
• Individual authorization code
This is a code that is always affiliated to a directory number in the
system.
The individual authorization code provides three different functions:
– Locking/unlocking of an extension. When locked a lower
common service profile is used.
– Authorization code dialing. This enables the calling party to
use other categories or service profiles than those the exten-
sion is programmed with.
– Changing the authorization code from the phone. This
enables the authorization code user to change the code when
suitable.
Using Last Number Redial on external calls after dialing with
common/individual authorization code:
• An UNLOCKED extension is allowed to use LNR without a call
discrimination check.
• A LOCKED extension is allowed to use LNR together with a call
discrimination check.
Procedure
Dialing from extension with common authorization code
A specific procedure dialed from the extension must be used when
making an authorization code call. The procedure is:
• Dial * FC * authorization code #,
where FC is the function code for common authorization code
dialing.
• Verification tone is received.
• Continue with external number.
The authorization code call will only be accepted if the authorization
code is valid.
The common service profile associated with the authorization code will
be used for the call, except if the authorization code cannot be verified,
then the default common service profile will be used instead. If the cate-
4/1553-ANF 901 54 Uen D4 2014-01-14