Download
Share
Print this page
Aastra 9112i Quick Start Manual
  1. Manuals
  2. Brands
  3. Aastra Manuals
  4. Telephone
  5. 9112I
  6. Quick start manual

Aastra 9112i Quick Start Manual

With pbxware
Hide thumbs Also See for 9112i:

Advertisement

Quick Links

Download this manual
Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 How to use Aastra 9112i with PBXware
How to use Aastra 9112i with PBXware
This "How to" is written as general guide on how to use Aastra 9112i with PBXware using
1.3.1.1095 SIP Aastra 9112i firmware. It covers the most common tasks that are required to
have your Aastra 9112i working efficiently.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 9112i and is the answer not in the manual?

Questions and answers

Related Manuals for Aastra 9112i

Summary of Contents for Aastra 9112i

  • Page 1: Table Of Contents

    4 Glossary How to use Aastra 9112i with PBXware This "How to" is written as general guide on how to use Aastra 9112i with PBXware using 1.3.1.1095 SIP Aastra 9112i firmware. It covers the most common tasks that are required to...

  • Page 2: Registering Aastra 9112I

    Registering Aastra 9112i Requirements 1. Aastra 9112i firmware. - Make sure that the device is loaded with 1.3.1.1095 SIP firmware. 2. DHCP server. - Fully configured and operational DHCP server. Manual Configuration UAD Settings STEP ONE: PBXware IP address. 1. Find out the IP address of the PBXware server.
  • Page 3 STEP THREE: UAD status. 1. Make sure the UAD is enabled. To check the UAD status navigate to "Settings:UAD", and click on the "edit" icon corresponding to "Aastra 9112i".
  • Page 4 2. Make sure "Status" is set to "active", "Auto provisioning" is set to "No" and "DHCP" is set to "Yes".
  • Page 5 3. Click on the "Save" button to save changes. Creating Extension STEP ONE: Add Extension. 1. Navigate to "Extensions". Click on "Add Extension". 2. The standard options window will be shown below. Creating Extension/Extensions Add...
  • Page 6 3. Select Aastra 9112i from "UAD" select box. 4. Select Location: "Local" or "Remote". Note: -"Local" is for all extensions registered on LAN. -"Remote" is for all extensions registered from remote networks, WAN, Internet etc. Creating Extension/Extensions Add 5. Click on the "Next" button.
  • Page 7 - Connect the ethernet port to a hub, router or switch as to access LAN. Registering Phone After successfully connecting the Aastra 9112i to the electricity and data networks it is time to register it to PBXware. 'STEP TWO: Aastra 9112i IP address.
  • Page 8 6. Use the "Navigation" button to navigate down to "IP Address". 7. Press the "Enter" button. STEP TWO: Aastra 9112i Web Interface. 1. Open a new browser window and enter the IP address in order to access Aastra 9112i administration interface. Example: http://192.168.1.101/...
  • Page 9 Example:' John Smith Other fields Other "options" or "fields" should be left blank or as is by default, they have no importance for registering the Aastra 9112i to PBXware. 3. Click on the "Save Settings" button. 4. Click on the "Reset" link.

  • Page 10: Auto Provisioning

    Registering Phone 5. Click on the "Restart" button to restart Aastra 9112i so that the changes take effect. - Conclusion: If everything is done as above described you should have successfully registered your Aastra 9112i to PBXware. Dial *123 to verify registration.
  • Page 11 2. Make sure "Status" is set to "active", "Auto provisioning" is set to "Yes" and "DHCP" is set to "Yes".
  • Page 12 3. Click on the "Save" button to save changes. Creating Extension STEP ONE: Add Extension. 1. Navigate to "Extensions". Click on "Add Extension". 2. The standard options window will be shown below.
  • Page 13 Creating Extension/Extensions Add 3. Select Aastra 9112i from "UAD" select box. 4. Select Location: "Local" or "Remote". Note: -"Local" is for all extensions registered on LAN. -"Remote" is for all extensions registered from remote networks, WAN, Internet etc. Creating Extension/Extensions Add 5.
  • Page 14 - Plug the power adapter into a power jack then connect it to the electricity network. - Connect the ethernet port to a hub, router or switch as to access LAN. Registering Phone After successfully connecting your Aastra 9112i to the electricity and data networks, it is time to register it to PBXware.
  • Page 15 6. Use the "Navigation" button to navigate down to "IP Address". 7. Press the "Enter" button. STEP THREE: Aastra 9112i Web Interface. 1. Open a new browser window and enter the IP address in order to access Aastra 9112i administration interface. Example: http://192.168.1.101/...

  • Page 16: Paging

    4. Click on the "Save Settings" button. 5. Click on the "Reset" link. Registering Phone 6. Click on the "Restart" button to restart Aastra 9112i so the changes take effect. Paging 1. Navigate your Internet browser to the phone's IP address (for example http://192.168.1.1).

  • Page 17: Glossary

    3. Make sure that Auto-Answer box is checked. Microphone Mute box is not checked. Paging 4. Navigate to the bottom of the page and click on the "Save Settings" button. Paging 5. Reboot the phone to apply the new settings. NOTE: At the time, paging option is set for all lines and works once the handset is picked up.
  • Page 18 - WAN = Wide Area Network. - Web Interface = A web interface is the system of controls with which the user controls a device. Retrieved from "http://wiki.bicomsystems.com/UAD_Aastra_9112i" Disclaimers - About Bicom Systems Wiki...