Aastra DBC 225 Directions For Use Manual page 114

DBC 225 MX-ONE
FOR
10.1.9.5
10.1.9.6
10.1.9.7
10.1.9.8
114
Octave:
An interval between eight tones.
Note: The soft-keys are only available when firmware revision R3F or
later is active for the telephone. See Firmware indication to check
the firmware revision.
11.10 Firmware indication on page 122
To save a melody
The written notes and any change is automatically stored whenever you
leave the Programming mode (also when time-out).
• Press soft-key Back , or the top function key (with the lit lamp)
To activate
• Enter melody mode.
• Press the selected melody key. The lamp is switched on.
• Press the soft-key Exit , or press # to exit Melody Mode.
Check the melody
There are three possibilities of checking the melody:
• When a melody is activated in programming mode the stored
melody is played.
• If the loudspeaker key is pressed in programming mode, the acti-
vated melody will be played.
• In program mode it is also possible to scroll through the activated
melody, note by note, with the soft-keys < and > , or the volume
keys (-/+).
Example
The example above, the James Bond theme, shows in the first position
a long tone, in the sixth position a pause and in the eleventh position a
raised d.
4/1553-ANF 901 54 Uen D4 2014-01-14