Automatic Timer - Aastra DBC 225 Directions For Use Manual

5.11.1.6
5.11.1.7
5.11.2
4/1553-ANF 901 54 Uen D4 2014-01-14
If the timer is running, it continues to run but the elapsed timer informa-
tion is not shown in the first row. The display shows instead time and
date in the first row.
The last row indicates a new set of soft-keys available when the timer is
still active but the elapsed time is not shown:
F1 Start/Stop
F2 Clear
F3 ShowTimer
F4 Exit
To display the time measurement
• Press the soft-key ShowTimer (F3).
The first row will show the elapsed time information. The last row indi-
cates a new set of soft-keys available when the timer is active and
displayed:
F1 Start/Stop
F2 Clear
F3 ShowDate
F4 Exit
To exit the time measurement
• Press the soft-key Exit (F4).
The timer function is deactivated and the display is used to show the
corresponding traffic information.

Automatic Timer

The following functions are valid for both incoming and outgoing calls.
Note: Soft-keys F1 and F2 have no function for this feature.
Stop/start time measurement. That is, the
previous function for that key (start or stop) is kept
unchanged.
Reset the time measurement.
Display the time measurement
Exit the time measurement.
Stop/start time measurement. That is, the
previous function for that key (start or stop) is kept
unchanged.
Reset the time measurement.
Show date.
Exit the time measurement.
D
URING CALLS
55