Aastra DBC 225 Directions For Use Manual page 103

9.16.3
9.16.4
9.16.4.1
9.16.4.2
4/1553-ANF 901 54 Uen D4 2014-01-14
FC1 = Message diversion feature code activated from the place of
origin.
FC2 = Message diversion feature code activated from another
extension.
Calls to an extension with ongoing message diversion
From an extension with capability to display absence information.
• From the extension, dial the extension number (e.g. 1234)
• Reason for diversion, time/date of return is displayed
• Press the * or soft key indicated DIAL to proceed with the
message diversion call
From an extension
To order
When you leave your room and wish to leave a message for callers via
a operator assistant, use the following procedure to switch your tele-
phone into the message diversion mode.
• Lift the handset
• Key *FC1* absence code * time#
• You will now hear a special dial tone
• Replace the handset
The code, reason for diversion, comprises one digit (0-9) and is deter-
mined internally by each individual customer.
Time, estimated time of return, is stated by four digits, as hour + minutes,
for example, 1430, month + day, for example, 1206, or day + month, for
example, 0612. The date format adopted is set by a parameter.
When the time of day or date is not to be stated:
• key # immediately after the code.
To order using the Absence soft-key
• Press Absence soft-key
• Press Select soft-key to select the absence reason option
O
THER FEATURES
103