Installation and Connection
In order to get access to the power terminal block, the bottom front cover must be removed, as showed in the
figure 3.7.
1
2
Figure 3.7 - Bottom front cover removal
3
At the CFW11 0180 T 2 O N1, CFW11 0211 T 2 O N1, CFW11 0180 T 4 O N1 and CFW11 0211 T 4 O
N1 inverters (supplied with Nema1 kit), it is also necessary to remove the front cover of the Nema1 kit bottom
part in order to be able to execute the power section electric installation – see the figure 3.8.
1
2
3
4
5
Figure 3.8 - Removal of the Nema1 kit bottom front cover at the CFW11 0180 T 2 O N1, CFW11 0211 T 2 O N1,
CFW11 0180 T 4 O N1 and CFW11 0211 T 4 O N1 inverters in order to get access to the power terminal block
3-7