Start-Up; Password Setting In P0000 - WEG CFW-11 User Manual

First Time Power-Up and Start-Up

5.2 START-UP

The start-up procedure for the V/f is described in three simple steps by using the Oriented Start-up routine
and the Basic Application group.
Steps:
(1) Set the password for parameter modification.
(2) Execute the Oriented Start-up routine.
(3) Set the parameters of the Basic Application group.

5.2.1 Password Setting in P0000

Step Action/Result
- Monitoring Mode.
- Press"Menu"
1
(rigth soft key).
- Group "00 ALL
PARAMETERS" is already
2
selected.
- Press "Select".
- Parameter "Access to
Parameters P0000: 0" is
3
already selected.
5
- Press "Select".
- To set the password,
press the Up Arrow
4
until number 5 is
displayed in the keypad.
- When number 5 is
5 displayed in the keypad,
press "Save".
- If the setting has been
properly performed, the
keypad should display
6 "Access to Parameters
P0000: 5".
- Press "Return"
(left soft key).
5-2
Display indication
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready 0rpm
LOC
Access to Parameters
P0000: 0
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Ready 0rpm
LOC
P0000
Access to Parameters
0
Return 15:45 Save
Ready LOC 0rpm
P0000
Access to Parameters
5
Return 15:45 Save
Ready 0rpm
LOC
Access to Parameters
P0000: 5
Speed Reference
P0001: 90 rpm
Return 15:45 Select
Figure 5.1 - Steps for allowing parameters modification via P0000
Step Action/Result
7 - Press "Return".
- The display returns to the
8
Monitoring Mode.
Display indication
Ready 0rpm
LOC
00 ALL PARAMETERS
01 PARAMETER GROUPS
02 ORIENTED START-UP
03 CHANGED PARAMETERS
Return 15:45 Select
Ready 0rpm
LOC
0 rpm
0.0 A
0.0 Hz
15:45 Menu