WEG CFW-11 User Manual page 76

Option Kits and Accessories
The code and model of each availabe accessory is presented in the table 7.2. The accessories can be ordered
separately and will be shippe in an individual package containing the components and the manual with detailed
instructions for the product installation, operation, and programming.
ATTENTION!
Only one module can be fitted at once in each slot (1, 2, 3, 4, or 5).
WEG Part
Name
Number
11008162 IOA-01
11008099 IOB-01
11008100 ENC-01
11008101 ENC-02
11008102 RS485-01
11008103 RS232-01
11008104 RS232-02
11008105 CAN/RS485-01 CAN and RS-485 interface module (CANopen / DeviceNet / Modbus).
11008106 CAN-01
11008911 PLC11-01
11008107 PROFDP-05
11008158 DEVICENET-05
10933688 ETHERNET/IP-05 Ethernet/IP interface module.
11008160 RS232-05
11008161 RS485-05
11008912 MMF-01
11008913 HMI-01
11010521 RHMIF-01
11010298 HMID-01
10960842 KN1E-01
10960850 KN1E-02
10960844 PCSE-01
7
10960847 CCS-01
10960846 CONRA-01
(1) Refer to the PLC Module Manual.
(2) Refer to the Anybus-CC Communication Manual.
(3) Refer to the Software Manual.
(4) Use DB-9 pin, male-to-female, straight-through cable (serial mouse extension type) for connecting the keypad to the inverter or Null-Modem
standard cable. Maximum cable length: 10 m (33 ft).
Examples:
- Mouse extension cable - 1.80 m (6 ft); Manufacturer: Clone.
- Belkin pro series DB9 serial extension cable 5 m (17 ft); Manufacturer: Belkin.
- Cables Unlimited PCM195006 cable, 6 ft DB9 m/f; Manufacturer: Cables Unlimited.
(5) Refer to the section 8.4 for more details.
7-4
Table 7.2 - Accessory models
Control accessories for installation in the Slots 1, 2 and 3
IOA module: 1 voltage/current analog input (14 bits); 2 digital inputs; 2
voltage/current analog outputs (14 bits); 2 open-collector digital outputs.
IOB module: 2 isolated analog inputs (voltage/current); 2 digital inputs; 2
isolated analog outputs (voltage/current) (the programming of the outputs
is identical as in the standard CFW-11); 2 open-collector digital outputs.
5 to 12 Vdc incremental encoder module, 100 kHz, with an encoder
signal repeater.
5 to 12 Vdc incremental encoder module, 100 kHz.
RS-485 serial communication module (Modbus).
RS-232C serial communication module (Modbus).
RS-232C serial communication module with DIP-switches for
programming the microcontroller FLASH memory.
CAN interface module (CANopen / DeviceNet).
PLC module.
Anybus-CC accessories for installation in the Slot 4
ProfibusDP interface module.
DeviceNet interface module.
RS-232 (passive) interface module (Modbus).
RS-485 (passive) interface module (Modbus).
Flash Memory Module for installation in the Slot 5 – Factory Settings Included
FLASH memory module.
Stand-alone keypad, blank cover, and frame for remote mounted keypad
Stand-alone keypad.
(4)
Remote keypad frame kit (IP56).
Blank cover for the keypad slot.
Nema1 kit for the frame size E models CFW11 0142 T 2, CFW11 0105 T 4
and CFW11 0142 T 4 (standard for N1 option).
Nema1 kit for the frame size E models CFW11 0180 T 2, CFW11 0211 T 2,
CFW11 0180 T 4 and CFW11 0211 T 4 (standard for N1 option).
Kit for power cables shielding - frame E (included in the standard product).
Kit for control cables shielding (included in the standard product).
Control rack (containing the CC11 control board).
Description
Miscellaneous
(5)
Identification
Parameters
Slot
P0027 P0028
1 FD--
1 FA--
2 --C2
2 --C2
3 ----
3 ----
3 ----
3 ----
3 ----
1, 2 and 3 ---- --xx
4 ---- --xx
4 ---- --xx
4 ---- --xx
4 ---- --xx
4 ---- --xx
5 ----
HMI -
- -
HMI -
- -
- -
(5)
- -
- -
- -
----
----
----
----
CE--
CC--
CC--
CA--
CD--
(1)(3)
(2)(3)
(2)(3)
(2)(3)
(2)(3)
(2)(3)
--xx (3)
-
-
-
-
-
-
-
-