Default Settings; Data Collection - Intermec CN4 User Manual

Appendix A — Specifications and Default Settings

Default Settings

110
AR1 Magnetic Card Reader
The magnetic card reader provides magnetic stripe reading capability
to the CN4.
AV6 Vehicle Dock
Use the vehicle dock to hold and charge the CN4 while using it on a
vehicle.
AV9 Vehicle Dock
Use the vehicle dock to hold and charge the CN4e while using it on a
vehicle.
CN4 Scan Handle
Use the scan handle to provide better ergonomics for higher-volume
scanning applications.
The following tables list the default values of the configuration
settings supported on the CN4. If you restore the CN4 to factory
default settings, the CN4 uses these values.
The settings are grouped by function and reflect the organization of
Intermec Settings. For detailed information on most of the
commands, see the
available from the Intermec web site at www.intermec.com.

Data Collection

Data Collection Setting
Enable scanner port
Enable scanner auto-detect
Symbology
AustraliaPost
Aztec
BPO
CanadaPost
Intermec Settings Command Reference
CN4 Mobile Computer User's Manual
Manual,
Default Value
Enable
Enable
Default Value
Disable
Disable
Disable
Disable