Configuring The Backlight - Intermec CN4 User Manual

Chapter 1 — Using the CN4

Configuring the Backlight

22
By default, the CN4 goes into Screen Off mode when there is no
activity on the computer. Screen Off mode turns off the backlight and
display. Press a key or tap the screen to resume activity.
It is possible to override the backlight settings by changing the power
management settings. For more information on configuring power
management, see "Managing Power on the CN4" on page 8.
To configure the backlight
1 Tap Start > Settings > the System tab > Backlight > the Battery
Power tab.
2 With Turn off backlight if device is not used for checked, select
the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).
You can also use Intermec Settings to configure the backlight
settings. For more information, see
Parameters" on page 48.
"Configuring the CN4
CN4 Mobile Computer User's Manual