Intermec CN4 User Manual page 78

Chapter 2 — Connecting and Configuring the CN4
66
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA. Data Encryption
automatically defaults to TKIP.
6 For 802.1x Authentication, choose either MD5, TLS, or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
c Select your certificate from the list and press Enter. The User
Logon dialog box appears.
d Enter a User Name and Domain and press Enter.
If you choose PEAP:
a Choose Properties > Run App. The Auth. Settings box
appears.
b Choose Validate Server and press Enter. When the radio
starts to authenticate, the Network Password dialog box
appears.
c Enter a User Name and Password and select Save Password.
d (Optional) In the Domain field, enter the Active Directory
domain associated with the user account.
8 Save your settings.
To enable WPA-PSK with Microsoft security
1 Make sure the communications and radio parameters on your
CN4 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
6 For Pre-Shared Key, enter the pre-shared key or the passphrase.
CN4 Mobile Computer User's Manual