Intermec CN4 User Manual page 17

CN4 Mobile Computer User's Manual
To change the battery
1 Press and release the Power button to suspend the CN4.
2 Unsnap the top end of the handstrap.
3 Slide the tab on the battery to release it from the CN4.
Note: For the CN4NI, use a Phillips screwdriver to loosen and
tighten the battery set screw.
4 Place the end of the battery into the battery compartment as
shown in the next illustration, and press down on the other end of
the battery until it clicks into place.
5 Snap the top of the handstrap into place.
Chapter 1 — Using the CN4
5