Resetting The Cn4 - Intermec CN4 User Manual

Resetting the CN4

CN4 Mobile Computer User's Manual
• Tap Mark to place an arrow marker above the graph.
8 Tap the Conf tab to set up a log file that lists RSSI history.
This screen includes the 802.11 radio driver version and available
radio modes.
To create a log file:
a Check the Log to File check box.
b (Optional) Change the sample period and number of samples
displayed.
c Tap Log File. The Save As screen appears.
d (Optional) Change the name of the saved log file, the folder to
which the file will be saved, the content type (log or text), and
the location.
e Tap Save.
You rarely need to reset the computer. If the computer does not
resume after pressing the Power button, or if the computer or an
application locks up, you may need to reset the CN4. The CN4 uses
the configuration currently saved in flash memory during the boot
process. There are three ways to reset the CN4:
• Warm booting the CN4
• Cold booting the CN4
Chapter 4 — Troubleshooting and Maintaining the CN4
97