Restoring Default Settings - Intermec CK31 User Manual

Chapter 2 — Configuring the CK31
Use this table to understand how to navigate and enter
information in Intermec Settings.
Navigating in Intermec Settings
To Perform This Function
Select or expand an option
Select text in a text box
Expand an option
Save settings

Restoring Default Settings

You can restore the CK31 to factory default settings from
Intermec Settings. For a complete list of the default settings, see
"Default Configuration" on page 118.
Note: When you use the Restore Defaults command, it restores
all parameters including network settings and it erases the
registry. As a result, you may lose network communications.
This option should only be used by network administrators or
by Intermec support personnel.
To restore factory default settings
1 From Intermec Settings, select Device Settings > Restore
Defaults.
2 Select Restore Defaults and choose the Run App button. A
Run Application dialog box appears asking if you want to run
the restore defaults program.
36
Do This
• Tap the option
• or to select an option
• From the highlighted option, press Tab
• Tap in the text box and drag the stylus
over the text
• Tap the option
• Press or to select an option and
then press B
• Tap File > Save Settings
• Press Alt F and then press Enter
CK31 Handheld Computer User's Manual