Intermec CN4 User Manual page 23

CN4 Mobile Computer User's Manual
To customize power timeout values
1 Tap Start > Settings > System tab > Power Profiler.
2 In the Power Profile tab, tap Enable Advanced Settings.
3 Tap the Screen Settings tab to change screen timeout values:
• Check the Enable Screen Off check box to be able to turn off
the screen independently of the CN4.
• To change the amount of inactivity time before the screen
turns off, move the Battery Power or External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
4 Tap the Device Settings tab to change power timeout values:
• Check the Enable Device Off check box to be able to turn off
the CN4 by pressing the Power button. This feature is enabled
by default unless you are using the Windows Mobile Phone
power profile.
• To change the amount of inactivity time before the CN4 turns
off and goes into Suspend mode, move the Battery Power or
External Power sliders.
For battery power, choose from 1 to 6 minutes. For external
power, choose from 1, 2, 5, 10, or 15 minutes, or disable this
feature.
5 Tap the Power Button tab to change what happens when you
press the Power button:
• Choose Turn off the Device to put the CN4 in Suspend mode
when you press the Power button. In Suspend mode, data
connections (except for WAN) are turned off. To restore data
connections, you need to press the Power button to wake up
the CN4.
Choose Turn off the Screen if you want to leave the CN4 on
•
but with the screen turned off when you press the Power
button. This mode uses more power than Suspend mode, but
maintains all data connections. Press the Power button to turn
the screen on.
Chapter 1 — Using the CN4
11