Removing A Cabled Hard Drive From A Hard Drive Carrier - Dell PowerEdge R230 Owner's Manual

Figure 20. Removing and installing a cabled hard drive carrier
1. hard drive
3. release tab
Next steps
1. If required, install a hard drive in the hard drive carrier and install the hard drive carrier into the hard
drive slot in the system.
2. If you are not replacing the hard drive immediately, insert a hard drive carrier in the empty hard drive
slot.
3. Follow the procedure listed in
Related Tasks

Removing a cabled hard drive from a hard drive carrier

Installing a cabled hard drive into a hard drive carrier
Installing a 3.5-inch cabled hard drive carrier
Removing a cabled hard drive from a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Remove the cabled hard drive carrier.
After working inside your
Safety instructions.
Before working inside your
2. power/data cable
4. hard drive carrier
system.
system.
61