Chapter 1: Introduction; Audience - Avaya S8700 Series Installing And Configuring

Chapter 1: Introduction

Use these procedures to install Avaya Communication Manager and configure a new Avaya
S8700-series media server and the associated components in a fiber-connected (fiber-PNC) or
an IP-connected (IP-PNC) port network configuration.
To configure the media server, use the Avaya Installation Wizard. To configure gateways and
other hardware components, use the following two administration interfaces:
The Maintenance Web Interface
●
The command line interface, either directly or through Secure Shell (SSH), Telnet, or a
●
terminal emulation program such as Avaya Native Configuration Manager.
This installation document includes the following information:
Pre-installation requirements
●
Configuring the SNMP modules in the UPS
●
Configuring the SNMP subagent in the Avaya Ethernet switch (if used)
●
Media server configuration
●
IP interface translations
●
IP interface configuration
●
Postinstallation administration
●
Installation verification
●
Media server access
●
Installation troubleshooting
●

Audience

This documentation is for the following people who install and configure the media server
components:
Trained field installation and maintenance personnel
●
Technical support personnel
●
Authorized business partners
●
Installing and Configuring the Avaya S8700-Series Media Server
on page 9
on page 31
on page 41
on page 47
on page 59
on page 67
on page 77
on page 87
on page 19
on page 23
7
February 2007