Configuring The Modem; Configuring Memory For An S8720 Media Server - Avaya S8700 Series Installing And Configuring

Configuring the modem

1. From the Maintenance Web Interface, under Server Configuration click Configure Server.
2. Click Continue until you get to the Specify how you want to use this wizard page.
3. Select Configure individual services and click Continue.
4. On the menu on the left, click Set Modem Interface.
5. Select Change Modem Setting and click Continue.
6. In the Extra Modem Initialization Commands window, type the initialization commands that
are appropriate for your modem and the country of operation. Click Help for help on what
to enter.
For example, to change the country code to Japan, type AT%T19,0,10.
7. Click Change.
The system displays a message that indicates that a modem route was added
successfully.

Configuring memory for an S8720 Media Server

You must select the memory configuration to be used for an S8720 Media Server system: either
Standard or Extra Large. If Hardware Duplication is turned on, administration for the S8720 in
an XL configurations is allowed only if the media servers are equipped with DAL2 duplication
memory cards.
Note:
If the customer chooses to increase the number of VAL circuit packs or the
Note:
number of Logged-In Agents, the customer will need to get a new License File
with increased capacities.
Note:
If the main servers are configured as S8720 in XL configuration, ESSs and LSPs
Note:
also must be configured to be compatible with the main S8720 in XL
configuration.
1. From the Maintenance Web Interface, under Server Configuration, click Configure
Server.
Installing and Configuring the Avaya S8700-Series Media Server
Configuring the modem
35
February 2007