Avaya S8700 Series Installing And Configuring page 49

You administer the static IP address for the circuit pack directly through the Ethernet port
connection on the faceplate (top port). See
Figure 3: Connecting the laptop directly to the IPSI
1
cadlipsi KLC 031502
Figure notes:
1. Services laptop computer
2. PCMCIA Network Interface Card (NIC)
Note:
Ensure that you have the password before proceeding.
Note:
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and click OK to open a MS-DOS Command Line window.
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
Installing and Configuring the Avaya S8700-Series Media Server
Figure 3.
2
3
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to IPSI
IPSI address configuration
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
4
February 2007
49