Finisher; Part Names; Specifications - Oki B8300 User Manual

FINISHER

The finisher can deliver collated sets either stapled or unstapled. Unstapled sets can be offset stacked
from the previous set for easy separation of the sets.

Part names

Staple box
Pull the box out to replace
the staple cartridge or
to remove jammed staples.
Do not put pressure on the finisher (particularly each tray).
●
Do not place anything on the top cover. Doing so will interfere with the machine's paper handling
●
during duplex printing.
The tray moves up and down during operation. Be careful not to impede its movement.
●
The finisher requires the installation of other peripheral devices in order to be functional and cannot
●
be installed together with some other devices.

Specifications

Name
Number of trays
Paper output
Tray type
Tray capacity
Paper sizes
Paper weight
Paper types
Tray full detection
Offset function
Paper sizes for stapling
Stapling capacity
Staples
Power supply
Dimensions
Weight
B8300-FNR staple cartridges must be used for this finisher.
The cartridge package contains three cartridges containing
approx. 3000 staples each.
Top cover
Open for misfeed removal.
Finisher
Two
Print face down
Top tray: normal tray, Lower tray: offset tray
Top tray: 500 sheets (A4 or 8½"
Lower tray: 750 sheets (A4 or 8½"
Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: Max. A4 or 8½" x 11", Min. B5
Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: 60 to 105 g/m
Top tray: same as the specifications of paper for feeding in the main unit
Lower tray: plain paper only
Provided in both the top tray and the lower tray
Provided for the lower tray only. The offset amount is approx. 25 mm (1 inch)
8½" x 11", A4, and B5 30 sheets* (A4, 8½" x 11" or smaller, 80 g/m
30 sheets* (A4 or 8½"
Up two sheets of cover stock (128 g/m
Single staple can be placed in the top left or lower left corners
or two staples can be centred on the left side
Requires the installation of an optional power supply unit
465 mm (W) x 530 mm (D) x 508 mm(H); (18
Approx. 21 kg (46.3 lb)
Specifications are subject to change without notice
Finisher — 72
Latch
Release the latch to
open the finisher
for misfeed removal.
2
11" size, 80 g/m or 20 lb
x
2
11", 80 g/m or 20 lb)
x
2
or 15 to 34 lb
2
11" or smaller, 80 g/m or 20 lb)
x
2
or 34 lb) can be included
1
/ " (W) x 20
8
Top tray
Extend tray to print
on to large paper
Offset tray
Stapled sets or sets
to be offset will
be delivered here.
2
or 20 lb)
7
/ " (D) x 20" (H))
8
.