Editing Or Deleting An Existing Network; Unavailable Services In Ppp-Ip Passthrough And Serial Modem Modes - Multitech MultiConnect rCell 100 User Manual

CHAPTER 6 CONFIGURING YOUR DEVICE
5. Click Finish.
6. To save your changes, click Save and Restart.

Editing or Deleting an Existing Network

1. To delete a network, click red X.
2. At the top of the pane, a message tells you the network is deleted. To undo the delete, click the Undo
link found in the message.
3. To edit a network, click pencil icon. Change the IP address or subnet mask as desired.
4. Click Finish.
5. To save your changes, click Save and Restart.
Note: You cannot edit the network name and you cannot delete a network if it is used in another configuration.
Unavailable Services in PPP-IP Passthrough and Serial Modem
Modes
In both PPP-IP Passthrough and Serial Modem modes, many rCell services described in this document are non-
configurable and therefore do not appear in the device configuration menu. If you choose one of these modes, all
sections between this and the previous note on this subject are not available.
42
®
MultiConnect rCell 100 MTR-H5 User Guide