Editing Or Deleting An Existing Network - Multitech multiconnect rcell 100 series Configuration Manual

4. In the Subnet Mask field, type the network mask.
Editing or deleting an existing network
1. To delete a network, click Delete.
2. At the top of the pane, a message tells you the network is deleted. To un‐do the delete, click the Undo
link found in the message.
3. To edit a network, click Edit. Change the IP address or subnet mask as desired. Click Finish.
Notes:
You cannot edit the network name.
You cannot delete a network if it is used in another configuration.
Using the Router's Web Interface 16