Service Statistics; Statistics Configuration Fields - Multitech MultiConnect rCell 100 User Manual

CHAPTER 13 DEVICE STATUS

Service Statistics

On the Web Management interface side menu, click Status & Logs > Services to display the Service Statistics
window. (If you use PPP-IP Passthrough mode, go to Status menu and follow the remaining instructions.) This
window shows the configuration (enabled or disabled) and the status of the following services:
■
DDNS
■
SNTP
■
TCP/ICMP Keep Alive
■
Dial-on-Demand
■ SMTP
■ SMS

Statistics Configuration Fields

The router saves the statistics periodically depending on the configured timeout and data limit. By default, the
Save Timeout is set to 300 seconds and the Data Limit is set to 5 MB. For the default scenario, the router saves the
data if more than 5 minutes has elapsed, or if more than 5 MB has been sent or received from the last check. The
router checks these conditions every minute, but the data is saved only if one of the conditions is met.
Field
Save Timeout
Save Data Limit
Delete Cellular History
Delete Ethernet History
76
Description
The router saves the statistical data when the desired timeout period
has elapsed. Default is 300 seconds (5 minutes).
The router saves the statistical data if the data limit is reached. Default
is 5 MB.
Deletes all Cellular history on the router.
Deletes all Ethernet history on the router.
®
MultiConnect rCell 100 MTR-H5 User Guide