Multitech MultiConnect rCell 100 User Manual page 49
Hide thumbs
Also See for MultiConnect rCell 100:
- Quick start manual ,
- User manual (104 pages) ,
- Configuration manual (38 pages)
Table of Contents
Advertisement
3.
In the Name field of the Add Route dialog box, type the name of the route.
4.
In the Address field, type the remote network IP address of the remote location.
5.
In the Mask field, type the network mask that is assigned on the remote location.
6.
In the Gateway field, type the IP address of the routing device that supports the remote IP Network.
7.
Click Finish.
8.
To save your changes, click Save and Restart.
®
MultiConnect
rCell 100 MTR-H5 User Guide
CHAPTER 8 SETTING UP THE FIREWALL
49
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect rCell 100 and is the answer not in the manual?