Multitech MultiConnect rCell 100 User Manual page 32
Hide thumbs
Also See for MultiConnect rCell 100:
- Quick start manual ,
- User manual (104 pages) ,
- Configuration manual (38 pages)
Table of Contents
Advertisement
CHAPTER 5 USING THE WIZARD TO CONFIGURE YOUR DEVICE
a.
From Baud Rate, select baud rate in BPS for the serial port from the drop down list. Default setting is
115200.
b.
In the Flow Control field, select the flow control option from the drop down list provided. Choose
from NONE or RTS-CTS.
c.
In the Parity field, select the parity option from the drop down list. Choose from NONE, ODD, or
EVEN.
d.
In the Data Bits field, select the data bits option from the drop down list. Choose from 7 or 8.
e.
In the Stop Bits field, select the stop bit option from the drop down list. Choose from 1 or 2.
8.
Click Finish.
9.
To save your settings, click Save and Restart.
32
®
MultiConnect
rCell 100 MTR-H5 User Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the MultiConnect rCell 100 and is the answer not in the manual?