Folding Backrest (Optional); Transit Use - Physipro XL 5 Owner's Manual

Hide thumbs Also See for XL 5:
Table of Contents

Advertisement

Owners manual

16.3 Folding Backrest (Optional)

This option allows you to completely
fold the backrest of the manual
wheelchair. This operation facilitates
transportation. To do so, lift lever A
and push the push handles forward.

16.4 Transit use

The wheelchair is equipped with
securement points which are used
to provide increased stability during
transportation.
The gure below shows the locations of
the wheelchair's securement points.
Two anchorage rings in the back
If the wheelchair is used for transport, it must be used in a forward-facing seating position.
Only use the provided securement points during transportation. Never x any anchor
cable on any other part of the wheelchair. Furthermore, you have to install the cables as
recommended by Transport Canada for maximum security.
The anchorage rings of the wheelchair do not substitute for the restraining system certi ed
by Transport Canada.
PHYSIPRO is not responsible for the risks undertaken when using the wheelchair as a seat in
public or private transportation.
Failure to follow these warnings may cause damage to your chair, a fall, tip-over or loss of
control and cause severe injury to the rider or others.
Two anchorage rings in the front
Figure 49: Transit use
43
ENGLISH
A
Figure 48: Folding the Back
Revision 4
January 2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl 5 ci

Table of Contents