Brakes - Physipro SPIRAL Owner's Manual

Owners manual

4.21 Brakes :

For every change to the propulsion wheels or tire wear, it's important to adjust
the braking force.
When the brakes are applied, they must be tightened from 1/8" to 1/4" (3 to 6
mm) into the tire.
Ensure that you tighten the nuts firmly after each adjustment. Check the air
pressure of the pneumatic wheels before adjusting the braking system.
Verify the air pressure of the pneumatic wheels before adjusting the braking
system.
Installing the braking system :
1. Attach the brake anchor (A) to the Spiral frame (B) using the bolts (C);
2. Attach the brake system (D) to the brake anchor (A) with the bolt (E);
49
Figure : Installing the braking system
47
47
ENGLISH
Révision 0
juillet 18
Revision 1
July 2018