Lubrication - THRUSH S2R – G10 Maintenance Manual

AIRCRAFT MAINTENANCE MANUAL
For the lubrication requirements, refer to Figure 2-4: Lubrication Chart (9 sheets). Before
adding grease to fittings, wipe the fittings clean. Lubricate the fittings and wipe off the excess
lubricant. Lubricate the hinges with a squirt can or a brush moistened with oil. Wipe off the
excess oil to prevent accumulation of dirt and grit.
THRU 9, ARE FOR LUBRICATION REFERENCE
ONLY. THEY DO NOT NECESSARILY SHOW
PROPER ASSEMBLY DETAILS AND ARE NOT
TO BE USED AS ASSEMBLY REFERENCE..
APPLICATION SYMBOL
HAND PACK
LUBRICATION GUN
OIL CAN
2-30
Page
THRUSH AIRCRAFT, INC – MODEL S2R-G10

LUBRICATION

WARNING
THE DRAWINGS OF FIGURE 2-4, SHEETS 1
Figure 2-4: Lubrication Chart (Sheet 1 of 9)
Use only MIL-G-24139 (Aeroshell 6) grease in
propeller.
SPECIFICATIONS AND TYPE OF
LUBRICANT
MIL-G-81322 (AEROSHELL 22)
AIRCRAFT GREASE
MIL-G-81322 (AEROSHELL 22)
AIRCRAFT GREASE
MIL-L-22851 (AEROSHELL OIL W
15W50) OR EQUIVALENT –
LUBRICATING OIL
* NOTE*
Effective 03/26/2010