Rudder Control Cables Installation - THRUSH S2R – G10 Maintenance Manual

AIRCRAFT MAINTENANCE MANUAL
from the turnbuckles aft are free for
removal.
E. Disconnect cables from adjustment
channel. The cables from the
turnbuckles forward to the pedals are
free for removal.
F. Remove the balance cables.
G. Remove rudder-aileron cable from
aileron vertical bell crank
Effective: 03/26/2010
THRUSH AIRCRAFT, INC – MODEL S2R-G10
Figure 7-6: Rudder Control System
RUDDER CONTROL CABLES
INSTALLATION
Ref. Figure 7-6
A. Install the cables in reverse order of the
removal procedures.
B. Check rigging per rigging instructions.
C. Assure all cables, cable guards and
turnbuckles are installed properly and
safety wired. Replace all skins removed
for access.
7-11
Page