Agitator And Spreader - THRUSH S2R – G10 Maintenance Manual

AIRCRAFT MAINTENANCE MANUAL

AGITATOR AND SPREADER

Ref. Figure 9-5
A number of dry
spreaders are available as options on the
S2R-G10. Factory installation includes
airframe attachment
Operation and maintenance of the
spreader should be done according to
the manufacturer's instructions. General
maintenance guidance is included below.
Effective: 03/26/2010
THRUSH AIRCRAFT, INC – MODEL S2R-G10
chemical/seed
hard points.
Figure 9-5: Agitator and Spreader e 9-5: Agitator and Spreader
A. Inspect spreader attachment to the
airframe for condition and security.
Ensure that spreader is level when
aircraft is in flight attitude.
B. Inspect gearbox for proper oil level (refer
to manufacturer's data).
C. Inspect fan, gearbox,
agitator and coupling for security and
proper operation.
D. Inspect agitator shaft seal at hopper for
evidence of leaks.
E. Inspect spreader unit for cracks, loose
rivets, and loose or missing vanes.
drive shaft,
9-7
Page