Windshield; Hopper Repair; Fuel Tank Repair - THRUSH S2R – G10 Maintenance Manual

AIRCRAFT MAINTENANCE MANUAL
coat directly onto the primed surfaces.
Apply at least two coats and allow time
for drying between the coats.

WINDSHIELD

An anti-static type of plastic cleaner, such
as Mirror Glaze
recommended for best cleaning. The side
windshields are plastic and should not be
cleaned with gasoline, alcohol, acetone,
and lacquer thinner, or window cleaning
spray. Those fluids will soften the plastic
and cause crazing.
plastic surface with a dry cloth, as that can
cause scratches and build up an electrical
charge (static) which will attract dust
particles. If scratches are visible after
removing the dust accumulation, finish the
plastic with a quality grade of commercial
wax. Apply the wax in a thin, even coat
2-28
Page
THRUSH AIRCRAFT, INC – MODEL S2R-G10
or equivalent, is
Avoid rubbing the
and carefully buff out with a soft cloth. Do
not buff or polish in one area for more than
a brief period of time. The heat generated
by rubbing the surface may soften the
plastic and may produce visual distortion.
The middle section of the windshield is
safety plate glass for better resistance to
scratching and bird strikes. It is enclosed
in an aluminum frame.

HOPPER REPAIR

Hopper repair may be accomplished in
accordance with the instructions contained
in Section 9.

FUEL TANK REPAIR

Fuel tank repair may be accomplished in
accordance with the instructions contained
in Section 5.
Effective 03/26/2010