Stator Installation - Mercury 75 Service Manual

Stator Installation

Two styles of stators are used on 1994 through
1996 model 75/90 outboards. These stators can
be identified by a large rim or small rim on the un-
derside of the stator where the stator harness ex-
its the stator. These
INSTALLED AS SHOWN RESPECTIVELY OR
PREMATURE STATOR FAILURE MAY OCCUR AS
A RESULT OF STATOR INTERFERANCE WITH
THE ENGINE BLOCK.
Small Rim Stator
b
c
b
Front of Engine
a - Small Rim
b - Stator Screws [Apply Loctite 271 to threads] [Torque
screws to 60 lb. in. (6.8 N·m)]
c - Stator Harness
4-72 - POWERHEAD
stators MUST BE
a
b
b
54130
Large Rim Stator
a
b
c
b
Front of Engine
a - Large Rim Stator
b - Stator Screws [Apply Loctite 271 to threads] [Torque
screws to 60 lb. in. (6.8 N·m)]
c - Stator Harness
90-830234R3 DECEMBER 1997
b
b
54132