Inspection - Mercury 75 Service Manual

Hide thumbs Also See for 75:

Table of Contents

Inspection

Do not use steel wire for cleaning the jets as this

may enlarge the jet diameters and seriously af-

fect performance. Use a petroleum based solvent

for cleaning and blow out all passages with com-

pressed air.

1. Inspect carburetor body. Replace if cracked or

2. Inspect float. Replace if cracked or damaged.

90-830234R3 DECEMBER 1997

3. Inspect idle mixture screw. Replace if bent or

4. Inspect main jet. Clean if contaminated.

5. Inspect inlet needle valve. Replace if end is worn

FUEL SYSTEM - 3B-23

Table of Contents