Mercury 75 Service Manual page 340

13. Push grommet up through engine tray and re-
move grommet from harness. Pull harness down
through engine tray.
a - Grommet
14. Use suitable tool to remove upper headed cross
pin. Retain pin. Straight pin is hard to remove
(see item 15).
a
b
a - Cross Pin (Design 1 - Straight)
b - Cross Pin (Design 2 - Headed)
5B-22 - MID-SECTION
a
53942
52941
15. If necessary, drive out upper pivot pin. This will
shear cross pin.
a
a - Upper Pivot Pin
Inspect cross pin hole and pivot pin hole for damage.
16. Use suitable punch to remove lower cross pin.
Retain cross pin.
a
a - Cross Pin
90-830234R3 DECEMBER 1997
53949
53950