Specifications - Mercury 75 Service Manual

Specifications

HORSEPOWER Model 75
(KW) Model 65 Jet/90
Model 100
Model 80 Jet/115
Model 125
OUTBOARD Model 65 Jet
WEIGHT Model 75/90
Model 80 Jet
Model 100/115/125
CYLINDER Model 65 Jet/75/90
BLOCK
Model 80 Jet/100/115/125
STROKE Length
CYLINDER Diameter (Standard)
BORE Taper/Out of Round Maximum
Bore Type
PISTON Piston Type
Standard
0.015 in. (0.381mm) Oversize
0.030 in. (0.762mm) Oversize
REEDS Reed Stand Open (Max.)
Reed Stop (Max.)
90-830234R3 DECEMBER 1997
Type
Displacement
Type
Displacement
75 (55.9)
90 (67.1)
100 (74.6)
115 (85.8)
125 (93.2)
315 lbs. (143kg)
305 lbs. (139kg)
357 lbs. (162kg)
348 lbs. (158kg)
In-line 3 Cylinder, 2 Cycle, Loop Charged
84.6 cu. in. (1387cc)
In-Line 4 Cylinder, 2 Cycle, Loop Charged
112.8 cu. in. (1848.8cc)
2.93 in. (74.42mm)
3.50 in. (88.9mm)
0.003 in. (0.076mm)
Cast Iron
Aluminum
3.495 in. (88.773mm)
3.510 in. (89.154mm)
3.525 in. (89.535mm)
0.020 in. (0.50mm)
Not Adjustable
POWERHEAD - 4-1