Black Stator Installation; Red Stator Installation - Mercury 45 Jet 50-55 Service Manual

Table of Contents

BLACK STATOR INSTALLATION

1. Install stator as shown.

a - Screws; apply Loctite 271 on Threads (unless Patch Screw

used) and torque to 60 lbs. in. (7.0 N·m)

2. Connect stator leads; refer to wiring diagrams in Sec-

a - Stator Leads to Switch Box (2)

b - Yellow Leads to Rectifier (2)

c - Ground Lead (1)

90-817643R1 DECEMBER 1996

IMPORTANT: The stator must be oriented as

shown to obtain correct system voltage.

1. Position red stator so appropriate arrow on decal

2. Secure stator with four (4) attaching screws re-

tained from disassembly. Apply Loctite 222 to

threads and torque to 60 lb. in. (7.0 N·m).

a - Orient Appropriate Arrow of Decal Aft

b - Apply Loctite 222 (obtain locally) To Screws (4) and Torque

to 60 lb. in. (7.0 N·m)

c - Stator Harness

3. Route stator harness thru top of electrical plate

grommet as shown. Secure to powerhead with

4. Position stator adaptor in cavity of electrical plate

with blue lead toward top of engine.

5. Refer to electrical diagram and make electrical

connections as shown.

6. Bundle and secure stator adaptor, harnesses and

connections with sta-straps as shown.

ELECTRICAL and IGNITION - 2A-9

Table of Contents